In the process of material mixing, often encounter material wetness or compaction, it is very difficult to achieve uniform mixing, some agglomeration binding force is very strong and not easy to break up, and even some are bundled fibers, need to be opened and scattered, at this time, the low-speed dual-motion mixer can not complete the uniform mixing, because the low-speed dual-motion mixer is to keep the shape of the powder particles do not change, and do not destroy the powder particles to achieve the purpose of uniform mixing, then you can choose the dual motion flying chopper mixer, A high-speed rotating flying chopper is set on the moving barrel, and while the barrel rotates to do gravity convection diffusion mixing, a built-in high-speed flying knife blade group shears and hits the powder to break the compacted particles and viscous particles in the powder. At the same time, it can also solve the problem of uniform mixing between fiber and powder.

There was an experiment for the customer before, the customer's material is white bundle fiber, the material needs to take into account the expansion after breaking up in the mixing process, this time it is necessary to reduce the loading capacity, and the other is the problem of discharging, the expansion of the bundled fiber after breaking is not easy to discharge, and the discharge port needs to be increased.

In the process of material mixing, there is not only powder agglomeration, but also bauxite cemented particles, with the dual motion flying chopper mixer, the powder agglomeration is solved in ten minutes, and the particles are perfectly opened and dispersed